1cm LED RGB+CCT STRIP, 20W/m (100W/5m) 24V HIGH CRI98

Varastossa 34590 kpl
SKU#: 1cm-STRIP19-IP21-24V-RGBCCT-SOLO

High quality NO DOTS 14,4W 24V RGB + CCT led strip!

This led strip uses RGB circuit with the CCT (2500-6000K) HIGH CRI around 98 with (White colour). 840 Led per meter! The led strip is dimmable. As a tape, it uses 3M tape that is extra durable and attaches the strip firmly. Led strip 19W (11,5W RGB +7,5W CCT) /meter is outputting enought for indirect moodlighting! Can also be used with RGBW drivers by choosing one White temperature.

Lue lisää
€ 0.47
ALV 0% | 24%
Lisää kommentti tilaukseen
Toimitustavat
Luotettavat ja nopeat toimitustavat
Maksutavat
Lasku, verkkomaksut, kortit, MobilePay
Vaihto ja palautus
Tarjoamme 14 vrk vaihto- ja palautusoikeuden
  • Tuotekuvaus

    High quality 19W 24V RGB + CCT led strip!

    This led strip uses RGB circuit with the CCT (2500-6000K) HIGH CRI around 98 with (White colour). The led strip is dimmable. As a tape, it uses 3M tape that is extra durable and attaches the strip firmly. Led strip 19W (3x4W RGB +2x4W CCT) /meter is outputting enought for indirect moodlighting!

    Lighting

    The strip is controlled with our VaLO Zigbee series remote (or HUE, Conbee2 USB )and Zigbee RGB+CCT receiver. With these you can adjust freely RGB or CCT. The product can be seen at our showroom in Vantaa Koivuhaka. You can use this strip also with all of our RGBW RF, SALI2 and Zigbee drivers. You can then choose 2500, 4500 or 6000K as of your white led temperature, but cannot adjust Temperature freely.

    This strip is mostly used in indirect lighting and for creating different moods. Perfect for spas, bars and terraces, also we have noticed that kids love this led strip. RGB+CCT led strip has 840 RGB and CCT led circuits on a meter!. This makes the light perfectly even. If installed in a way you cannot see the light source ie. indirect light. There are no visible dots to be seen if looked straight to the light (or if installed next to a shiny wall).

    Installation

    LED strip comes in a 5m roll that can be cut to measure in every 4,2cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering. There are 10 cm of mounting cable soldered to both ends of the strip. We will help you with any installation questions.

    If you have more than 10m of RGB+CCT led strip, you need to feed the power from both ends to minimize the powerloss. All installations should be made on top of aluminium (ie. aluminium profile), that way the excess heat gets conducted away from led circuit and makes it last longer. Strip is 12mm wide, with thick copper base.

    LED strip works well with solar power and in boats and cars, as it is 24VDC you might not even need a driver, just controller!

    Remember to order a 24V driver and controller. For the whole 5 meters you need a minimum of 100W driver.

    Dimming

    LedStore's RGB+CCT led strip requires at least 40A Zigbee controller and HUB/remote. This is a perfect solution also in places where you have power for the strip but no wall switch ready. With this system, you just hook the wireless receiver between led strip and driver and have the remote were ever you like.

    Create a light of your own

    Why would you use led strip only in traditional way (cabinets, indirect light etc.) when you can make a light of almost anything. Old cart wheel, zink bucket or even a wooden boat turns in to a light when you put led strip inside it! Get creative!

    Light colour temperature

    RGB (red, green and blue) and Warm (2500K) to cool white colour (6000K).

  • Lisätiedot
  • Arvostelut
  • Usein kysyttyä
  • Zigbee CCT
  • RF CCT
  • DALI2 CCT
  • CCT Cables
  • CRI

High quality 19W 24V RGB + CCT led strip!

This led strip uses RGB circuit with the CCT (2500-6000K) HIGH CRI around 98 with (White colour). The led strip is dimmable. As a tape, it uses 3M tape that is extra durable and attaches the strip firmly. Led strip 19W (3x4W RGB +2x4W CCT) /meter is outputting enought for indirect moodlighting!

Lighting

The strip is controlled with our VaLO Zigbee series remote (or HUE, Conbee2 USB )and Zigbee RGB+CCT receiver. With these you can adjust freely RGB or CCT. The product can be seen at our showroom in Vantaa Koivuhaka. You can use this strip also with all of our RGBW RF, SALI2 and Zigbee drivers. You can then choose 2500, 4500 or 6000K as of your white led temperature, but cannot adjust Temperature freely.

This strip is mostly used in indirect lighting and for creating different moods. Perfect for spas, bars and terraces, also we have noticed that kids love this led strip. RGB+CCT led strip has 840 RGB and CCT led circuits on a meter!. This makes the light perfectly even. If installed in a way you cannot see the light source ie. indirect light. There are no visible dots to be seen if looked straight to the light (or if installed next to a shiny wall).

Installation

LED strip comes in a 5m roll that can be cut to measure in every 4,2cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering. There are 10 cm of mounting cable soldered to both ends of the strip. We will help you with any installation questions.

If you have more than 10m of RGB+CCT led strip, you need to feed the power from both ends to minimize the powerloss. All installations should be made on top of aluminium (ie. aluminium profile), that way the excess heat gets conducted away from led circuit and makes it last longer. Strip is 12mm wide, with thick copper base.

LED strip works well with solar power and in boats and cars, as it is 24VDC you might not even need a driver, just controller!

Remember to order a 24V driver and controller. For the whole 5 meters you need a minimum of 100W driver.

Dimming

LedStore's RGB+CCT led strip requires at least 40A Zigbee controller and HUB/remote. This is a perfect solution also in places where you have power for the strip but no wall switch ready. With this system, you just hook the wireless receiver between led strip and driver and have the remote were ever you like.

Create a light of your own

Why would you use led strip only in traditional way (cabinets, indirect light etc.) when you can make a light of almost anything. Old cart wheel, zink bucket or even a wooden boat turns in to a light when you put led strip inside it! Get creative!

Light colour temperature

RGB (red, green and blue) and Warm (2500K) to cool white colour (6000K).

  • Toimitustila Varastossa
  • Valmistaja Ledstore
  • Tuotepolku Etusivu Led-valot KäyttökohteissaSisätilat 1cm LED RGB+CCT STRIP, 20W/m (100W/5m) 24V HIGH CRI98
  • Tuoteryhmä Sisätilat
  • Tuotenumero 1cm-STRIP19-IP21-24V-RGBCCT-SOLO
  • Wattimäärä 20
  • Luumen 5000
  • Käyttöikä 35000
  • Malli 1cm-STRIP19-IP21-24V-RGBCCT-SOLO
  • Mitat 12x2
  • Pakkauksen pituus 2.5
  • Pakkauksen korkeus 25
  • Pakkauksen leveys 22
  • Muuta 3M tape on backside
  • Hyväksyntä CE, RoHS, IP21
Uusi tuotearvostelu

Ole ensimmäinen arvostelun kirjoittaja!

Arvostelemalla osallistut 50 euron lahjakortin arvontaan.

Asiakkaiden kysymykset
Ei vielä kysymyksiä.

Zigbee CCT muuntajat

Zigbee CCT Tuotteet joita voit käyttää kun haluat portaattoman CCT säädön.

Valaisin tilataan ilman omaa muuntajaa ja valitaan ryhmämuuntaja CCT spoteille tai CCT paneeleille, sekä CCT led valonauhalle.

Spottien ja paneelien muuntajan koon laskeminen tapahtuu laskemalla Watit yhteen + 25%.

CCT led nauhalle riittää 15% pelivaraa.

esim 4x 9W CCT spotti = 45W, joten lähin on 50W

RF CCT muuntajat

RF CCT Tuotteet joita voit käyttää kun haluat portaattoman CCT säädön. Valaisin tilataan ilman omaa muuntajaa ja valitaan ryhmämuuntaja CCT spoteille tai CCT paneeleille, sekä CCT led valonauhalle.

Spottien ja paneelien muuntajan koon laskeminen tapahtuu laskemalla Watit yhteen + 25%.

CCT led nauhalle riittää 15% pelivaraa.

DALI2 (DT8) CCT muuntajat

DALI2 CCT Tuotteet joita voit käyttää kun haluat portaattoman CCT säädön.

Valaisin tilataan ilman omaa muuntajaa ja valitaan ryhmämuuntaja CCT spoteille tai CCT paneeleille, sekä CCT led valonauhalle.

Spottien ja paneelien muuntajan koon laskeminen tapahtuu laskemalla Watit yhteen + 25%.

CCT led nauhalle riittää 15% pelivaraa.

esim 4x 9W CCT spotti = 45W, joten lähin on 50W

CCT johtosarjat

Johtosarjoilla saat asennettua nopeasti ja toimintavarmasti CCT spotit ja CCT paneelit suoraan yhteen muuntajaan. Kaikki valaisimet asennetaan rinnakkain samaan muuntajaan. 

Spoteissa on vakiona 15cm liitoskaapeli liittimellä, joten näillä johdoilla saat helposti luotua oman sarjan.

3 metrin välikaapeleita voit laittaa vaikka 2 kpl peräkkäin. Kaikissa liitoskohdissa on IP54 tiivis vedonpoisto.

Jakotukeissa (3 ja 6) ei ole pakko asentaa valaisinta jokaiseen liittimeen.

MIKÄ ON CRI, ELI VÄRINTOISTOINDEKSI

Laadukkailla LED-valoilla on myös korkea värintoistoindeksi eli CRI. Hyvä värintoistoindeksi (CRI) kotikäyttöön on yli 90, ja nykyään monet markettivalot ovat valitettavasti lähempänä 80:tä.

CRI kertoo, kuinka hyvin LED-valo näyttää värit sellaisina kuin niiden pitäisi olla. Suunnittelijoille ja arkkitehdeille, sekä sisustajille sen pitäisi olla yksi tärkeimmistä näkökohdista. Varmista, että valaistus on täydellinen, jotta taideteoksesi on sellainen kuin sen on tarkoitus olla.

Mikä on CRI, eli Värintoisto indeksi

Värintoistoindeksi

Värintoistoindeksi ilmaistaan numerona asteikolla nollasta sataan, jossa 0 = ei värintoistoa ja 100 = täysi värintoisto. LED-valojen värintoistoindeksi tunnetaan myös nimellä Ra, joka mitataan pienemmällä asteikolla kuin CRI. Tämä Ra-arvo ei sisällä esimerkiksi punaisia sävyjä tai ihon sävyjä, joten se on "kaunisteltu" luku LED-valon todellisesta laadusta.

RA-luku

Ra-arvo mittaa värien toistoa kahdeksan eri vertailuvärin avulla. CRI ottaa huomioon laajemman (15) aallonpituusalueen, mukaan lukien punaiset ja muut lämpimät värit.



Ra-arvo lasketaan leikkaamalla aallonpituusalue, painottamalla sinisiä ja violetteja sävyjä ja laskemalla R-lukujen 1-8 painotettu keskiarvo.

Ra-arvon ulkopuolelle jäävät muun muassa kirkkaiden punaisten, keltaisten ja vihreiden sävyjen värintoisto sekä lähellä ihon sävyä olevat sävyt. Näitä kuvaavat R-arvot 9-15. Seuraavassa on kuva mittaustuloksesta jolla helposti hämätään kuluttajaa.

Tämä mittaustulos on 9W CCT Led spotista

Tämä mittaustulos on 9W CCT Led spotista

 

Lue lisää aiheesta:

Ledien värintoisto – Mitä eroa on CRI ja Ra-arvolla

loading

Suosittelemme lisäksi

Yhteenkuuluvat tuotteet

Hyviä yhdessä

Asiakkaat ostivat lisäksi